SUBJECT: Cooler Condensate Pan Relocation REVISION: 00 MODELS: 027 Coolers PURPOSE / BACKGROUND INFORMATION: In isolated cases, Royal Vendors has experienced field reports of condensation building up around the condensate drain, which is located on the lower left hand side of the evaporator box. When condensation builds up in this location, this condensation can miss the condensate pan and … [Read more...]
346. Cooler Caster Kit Installation
May 31, 2017 by ·
SUBJECT: Cooler Caster Kit Installation REVISION: 02 MODELS: Royal Vendors Coolers PURPOSE: This bulletin explains the procedure for installing caster kits on Royal Vendors Coolers. Download PDF: Service Bulletin 346 … [Read more...]
404. Model 10 / 12 Cooler Caster Kit Installation
January 12, 2017 by ·
SUBJECT: Model 10 / 12 Cooler Caster Kit Installation REVISION: 00 MODELS: Model 10 / 12 Coolers PURPOSE: This bulletin describes the process for installing casters on the Model 10 and 12 Coolers. Download PDF: Service Bulletin 404 … [Read more...]
HRVC-010 / HRVC-012 Cooler
December 23, 2015 by ·
Royal Vendors' HRVC-010 / HRVC-012 Cooler Operation and Service Manual Download PDF: Royal Vendors HRVC-010 / HRVC-012 Cooler … [Read more...]
400. Health Sensor Field Test
October 15, 2015 by ·
SUBJECT: Health Sensor Field Test (Full-cycle Sensor-controlled Test) REVISION: 00 MODELS: All Coolers and Freezers with Health Safety Controllers TOOLS REQUIRED: Phillips screwdriver ESTIMATED TEST PROCEDURE TIME: About 45 minutes PURPOSE: The procedure below can be used to determine whether or not the equipment's Health Safety Controller functions correctly. Download PDF: Service … [Read more...]
77. Cooler / Freezer Door Gasket Reforming Procedure
September 15, 2015 by ·
Subject: Cooler / Freezer Door Gasket Reforming Procedure Revision: 02 Models: All Cooler and Freezer models Tools required: Heat gun Estimated time: <10 minutes Information: When a replacement door assembly is received for a Cooler or Freezer, the gasket may need to be reformed, if there are gaps between the door and the cabinet. This procedure describes how to reform the … [Read more...]
393. Left-hand Cooler Door Hinge Installation
August 22, 2014 by ·
SUBJECT: Left-hand Cooler Door Hinge Installation REVISION: 00 MODELS: All Cooler models INFORMATION: This bulletin describes the procedure for changing the hinge from the right side to the left side on a Royal Vendors Cooler. Download PDF: Service Bulletin 393 … [Read more...]
389. Enabling the Battery on the Health Timer Controller
April 15, 2014 by ·
SUBJECT: Enabling the Battery on the Health Timer Controller REVISION: 00 MODELS: Health Safety Cooler REASON FOR BULLETIN: The Health Safety Controller's backup battery is disabled when not installed in the Cooler to preserve its shelf life. Failure to enable the battery will cause the door lock mechanism to stay in the locked position in the event the Cooler loses power. This bulletin … [Read more...]
Health Safety Cooler (RVCH-027)
February 18, 2014 by ·
Royal Vendors' Health Safety Cooler (model RVCH-027) Operation and Service Manual Download PDF: Health Safety Cooler … [Read more...]
Royal Vendors Cooler (RVC-027)
February 18, 2014 by ·
Royal Vendors' Cooler (model RVC-027) Operation and Service Manual Download PDF: Royal Vendors Cooler … [Read more...]
